IBM 8862 - Eserver xSeries 365 Maintenance And Troubleshooting Manual page 111

Hardware maintenance manual and troubleshooting guide
Hide thumbs Also See for 8862 - Eserver xSeries 365:
Table of Contents

Advertisement

Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Error code/symptom
180-xxx-005 (Failed SCSI Backplane LED
test)
180-xxx-006 (Failed Memory Board LED
test)
180-xxx-007 (Failed Power Supply Fan
LED test)
180-xxx-008 (Failed I/O board LED test)
180-xxx-009 (Failed Active PCI
test)
201-xxx-Ynn (failed Memory Test; see
"Memory modules" on page 39)
Note: nn = DIMM 1-16 [Port 1: DIMMs
9-16; Port 2: DIMMs 1-8].
201-XXX-Y21 (Multiple DIMM failure in
Port 1 Bank 1; see "Memory modules" on
page 39)
201-XXX-Y22 (Multiple DIMM failure in
Port 1 Bank 2; see "Memory modules" on
page 39)
FRU/action
1. SCSI backplane cable
2. SCSI backplane
3. I/O board
4. Microprocessor tray assembly
1. Memory cassette
2. Microprocessor tray assembly
3. I/O board
1. Power supply
2. Power supply structure
3. I/O board
v I/O board
LED
1. PCI switch card assembly
2. I/O board
1. Replace DIMM nn [nn = 1-16].
2. Replace memory cassette.
1. Isolate failing DIMM:
a. Replace a DIMM in bank with a "known good" DIMM.
b. Rerun memory diagnostic for the failing bank.
c. If test fails, mark replaced DIMM as "good" DIMM.
d. If test passes, mark replaced DIMM as "bad" DIMM.
e. If DIMM tested is "bad", remove it and replace it.
f. If DIMM tested is "good", do not replace it.
2. Repeat steps 1a through 1f with other DIMMs in failing bank until
error is fixed.
3. If error is not fixed, replace memory cassette.
1. Isolate failing DIMM:
a. Replace a DIMM in bank with a "known good" DIMM.
b. Rerun memory diagnostic for the failing bank.
c. If test fails, mark replaced DIMM as "good" DIMM.
d. If test passes, mark replaced DIMM as "bad" DIMM.
e. If DIMM tested is "bad", remove it and replace it.
f. If DIMM tested is "good", do not replace it.
2. Repeat steps 1a through 1f with other DIMMs in failing bank until
error is fixed.
3. If error is not fixed, replace memory cassette.
Chapter 6. Symptom-to-FRU index
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xseries 365 8862Xseries 365 8861

Table of Contents