Tandberg Data MSERIES FC USER User Manual page 25

Command
XCStatus
Zmodem (Immediate)
Description
Allows the user to poll for the status of
Extended Copy commands issued to
the Fibre bridge. Each Extended Copy
command is identified with a unique
number. This number (called
cmdnumber) is used when invoking the
xcdevices and xcerror commands.
Transfers a firmware image or
NVRAM parameter file to or from the
bridge using ZMODEM file transfer
protocol.
FC420 Services Software Commands
Tandberg Data FC420 Bridge Option User's Guide
Document T6423053-01, Ver. 1, Rel. 0
Default Syntax
get xcstatus
zmodem [send [filename] |
receive]
November 2002
25