Command Syntax; List Of Abbreviations; Command Listing - Tandberg Data MSERIES FC USER User Manual

Tandberg Data FC420 Bridge Option User's Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002

Command Syntax

List of Abbreviations

Command Listing

Table 2 Most Common
FC420 Services
Commands
Command
AutoMap (Immediate)
BootFibreDelay
BootScan
BootScanPorts
ClearEvent (Immediate)
14
0
The following is a list of syntax used to describe command lines:
• [ ] indicates required entry
• < > indicates optional entry
• | indicates choose one entry
0
The following is a list of abbreviations used to describe command
lines:
• fpFibre Channel port number (0 - 2)
• flFibre Channel LUN (0 - 31)
• sbSCSI bus number (0 - 3)
• stSCSI target ID (1 - 15)
• sl SCSI LUN (0 - 7)
0
A list of the currently available FC420 Services Software commands is
shown in table
Description
Automatically maps all currently
operational SCSI devices attached to
the FC420 Fibre bridge.
Selects/displays the boot fibre delay
(in seconds).
Enables/disables the boot scan feature.
This feature provides dynamic
mapping of SCSI devices to fibre port/
lun combinations via a SCSI port at
boot time.
Selects/displays the ports to be used
for a boot scan.
Clears the contents of the event log.
FC420 Services Software Commands
1.
Default
0
disabled
auto
Syntax
automap
set bootfibredelay [0 | 15 |
30]
get bootfibredelay
set bootscan [enabled |
disabled]
get bootscan
set bootscanports [fp] | [all] |
[auto]
get bootscanports
clearevent