Tandberg Data MSERIES FC USER User Manual page 15

Bridge option
Table of Contents

Advertisement

Command
DhcpFixedDelay
DispEvent
Sets the switches that controls the filtering performed when
displaying events. Switches have the following settings:
[subsystem] switch: mask that controls which subsystem events
are displayed. The mask is a byte value with the following bit
patterns corresponding to the currently supported subsystems:
0x01 FCP Processor /i960
Interaction
0x02 SCSI Processor/i960
Interaction
0x04 Ethernet (Future)
0x20 NVRAM & Flash
To display the events from several different subsystems, use a
mask value equal to the logical OR of the corresponding
subsystem values. To display events from all subsystems enter
the value 3Fh for the mask.
[event_level] switch: mask that controls what reporting level
events are displayed. The mask is a byte value with the following
bit patterns corresponding to the currently supported reporting
levels:
0x01 Info; general information
0x02 Warning; unexpected situation/condition
0x04 Critical; operation limited/curtailed
0x08 Failure; hard failure
0x10 Other; otherwise not categorized
0x20 Debug; tracking events
To display events from several different reporting levels, use a
mask value equal to the logical OR of the corresponding
reporting levels. To display events for all reporting levels enter
the value 3Fh for the mask.
[status] switch: has the following two values which correspond
to the status of the events to be displayed:
all: All events, regardless of their status values are displayed.
ngood: Only events with a status other than good are displayed.
DispFcPortDB
(Immediate)
Description
Selects/displays the delay interval (in
seconds) between DHCP client
requests.
Displays the contents of the specified
Fibre port's internal database.
FC420 Services Software Commands
Tandberg Data FC420 Bridge Option User's Guide
Document T6423053-01, Ver. 1, Rel. 0
Default
Syntax
0
set dhcpfixeddelay [0-255]
get dhcpfixeddelay
set dispevent [subsystem]
[event_level] [status]
get dispevent
0x00
0x00
ngood
dispfcportdb <fp>
November 2002
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSERIES FC USER and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Fc420

Table of Contents