Draytek VIGOR VIGOR2750 User Manual page 91

For the security of your system, choose the proper encryption for data transmission. Different
encryption mode will bring out different setting encryption ways.
None
The encryption mechanism is turned off.
WEP
Accepts only WEP clients and the encryption key should be entered in WEP Key.
Default Key
Key1-Key4
Authentication Mode
WPA-PSK
Accepts only WPA clients and the encryption key should be entered in PSK. The WPA
encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via
802.1x authentication.
Vigor2750 Series User's Guide
All wireless devices must support the same WEP
encryption bit size and have the same key.
Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to
5 ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The
allowed content is the ASCII characters from 33(!) to
126(~) except '#' and ',' .
Choose OPEN or SHARED as the authentication mode.
OPEN: Set wireless to authentication open mode.
SHARED: Set wireless to authentication shared mode.
81