Draytek VIGOR VIGOR2750 User Manual page 45

S t a t i c
S t a t i c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.
IP Address
Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
Mode
Vigor2750 Series User's Guide
I P
I P
Type the IP address.
Type the subnet mask.
Type the gateway IP address.
Type in the primary IP address for the router if you want to use
Static IP mode.
Type in secondary IP address for using in the future if
necessary.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
35