Draytek VIGOR VIGOR2750 User Manual page 136

Mode
Ping IP
Enable/Disable
Clone MAC Address
After finishing all the settings here, please click OK to activate them.
P P P P T T P P / / L L 2 2 T T P P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Username
Password
Server Address
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
Type in the username provided by ISP in this field.
Type in the password provided by ISP in this field.
Type in the IP address for PPTP /L2TP server.
126
Vigor2750 Series User's Guide