Draytek VIGOR VIGOR2750 User Manual page 33

Vigor2750 series high speed vdsl2 router
Table of Contents

Advertisement

After finishing the settings here, please click Next.
P
P
P
P
T
T
P
P
/
/
L
if you click PPTP/L2TP as the protocol, please manually enter the Username/Password
provided by your ISP and all the required information.
User Name
Password
Server Address
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address
Subnet Mask
Redial Policy
Idle Time Out
MTU Size
Vigor2750 Series User's Guide
L
2
2
T
T
P
P
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Specify the IP address of the PPTP server.
Type the IP address if you choose Static IP as the WAN IP
network setting.
Type the subnet mask if you chose Static IP as the WAN IP.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose
Connect on Demand, you have to type value here.
It means Max Transmit Unit for packet. The default
setting is 1442.
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIGOR VIGOR2750 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Vigor2750nVigor2750vn

Table of Contents

Save PDF