Draytek VIGOR VIGOR2750 User Manual page 222

A d d i n g a N e w R u l
A d d i n g a N e w R u
Click Add New Rule to configure a new rule for IPv6 Firewall.
Note: You can set up to 20 sets of IPv6 rules.
Name
Protocol
Source IP Type
Source IP
Source Subnet
Destination IP Type
Destination IP
e
l e
Type a name for the rule.
Specify a protocol for this rule.
Determine the IP type as the source.
Type the IP address here if you choose Single as Source
IP Type.
Type the subnet mask here if you choose Subnet as
Source IP Type.
Determine the IP type as the destination.
Type the IP address here if you choose Single as
Destination IP Type.
212
Vigor2750 Series User's Guide