Management - Draytek VIGOR VIGOR2750 User Manual

4 . 1 3 . 8 M a n a g e m
4 . 1 3 . 8 M a n a g e m
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable
HTTP/HTTPS/SSH/ICMP
Ping/FTP/TELNET
Enable SNMP
Access List
e n t
e n t
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the router
from Internet. Check the box(es) to specify.
Check it to enable such service.
Manager Host IP – Set one host as the manager to
execute SNMP function. Type the IP address to specify
the certain host.
You could specify that the system administrator can only
login from a specific host or network defined in the list.
A maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login
to the router.
230
Vigor2750 Series User's Guide