D: Set The Dip Switches To On; E: Reboot Your Computer From The Fdd - Intel 3100C Service Manual

D: Set the DIP switches to ON

1) Turn off the computer.
2) Press the two keyboard latches to elevate the keyboard from its normal position. (refer to
Drawing 4-1)
3) Carefully lift the keyboard assembly out to expose the mainboard.
Drawing 4-1
Drawing 4-2

E: Reboot your computer from the FDD

1)Insert the newly formatted disk with the BIOS files into your Floppy Drive.
2)Restart your computer.
Note: When your system boots from the floppy disk it will automatically update the BIOS since
one of the files your copied from the website is an executable file.
4) Locate the DIP switches (Drawing 4-2).
5) Set SW1-1 and SW1-2 to the ON position
6) Reinsert the keyboard.
DIP Switch (SW1)
SW1-1 SW1-2
On On
36
Purpose
Flash ROM BIOS
Updating BIOS