Replace The Hex Studs ( If You Are Installing A Ppga-370 Type Processor) - Intel 3100C Service Manual

Replace the HEX STUDS ( if you are installing a PPGA-370 type processor)

There are two heights of hex studs which can be used in the mainboard, 6.5 mm and 7.7 mm
(the 6.5 mm hex studs are gold and the 7.7 mm hex studs are black). If you are going to install a FC-
PGA type processor you will need 6.5 mm hex studs. These hex studs come with the mainboard so
you don't need to do this step.
If you want to install a PPGA-370 processor you will need 7.7 mm hex studs. To add or replace
the hex studs simply:
1) Unscrew the existing hex studs.
2) Screw in the new correct size hex studs.
Caution: You must use 6.5 mm hex studs for the FC-PGA 370 processor and 7.7 mm hex studs
for the PPGA370 processor. Failure to do this will cause the processor to overheat.
CPU (processor)
Hex studs
31