Vga Controller - Ati 3D Rage Lt Pro; Pc Card 95 (Card Bus) Interface Controller - Ti-1225 - Intel 3100C Service Manual

Table of Contents

Advertisement

Supports PCI at 33 MHz
-
Supports PCI Rev 2.1 Specification
-
Supports Full ISA or Extended I/O bus
-
Supports Mobile Deep Green Environments
-
3.3V Operation with 5V Tolerant Buffers
-
Ultra-low Power for Mobile Environments Support
-
Full Support for APCI (Advanced Configuration and Power Interface) Revision 1.0
-
Integrated IDE Controller
-
Supports Ultra DMA/33
-
Supports two 82C37 Enhanced DMA Controller
-
Supports two 82C59 Interrupt Controller
-
Supports 82C54 Timer Based
-
Supports UHCI USB Ports
-
Supports SMBus
-
VGA controller – ATI 3D RAGE LT PRO
The ATI 3D RAGE LT PRO Multimedia Flat Panel Controller is a DRAM based, fully integrated
LCD, CRT & TV 64 bits controller for AGP systems. It contains the following functions:
Supports displays for 8 MB
-
64bit high performance 2D/3D Graphic Engine
-
Supports bus master AGP and SGRAM memory
-
Supports 24 bit TFT panels up to 1024x768 resolution
-
Supports non-interlaced 1280x1024x64k, 1024x768x16M, 800x600x16M, and
-
640x480x16M color on CRT
Simultaneous display in 24 bit color on flat panel and CRT
-
Internal buffer provides flicker reduction
-
ATI 3D RAGE LT PRO DAC can directly interface with a standard off-the-shelf NTSC/PAL
-
encoder. Composite synchronization signals support for standard home TV connection up to
1280x1024x16M and 16:9 Wide mode
Graphic functions optimized by a 64-bit internal data bus and VGA, SVGA, and XGA flat
-
panel
Provides flexible and extensive power management capabilities and supports four states of
-
VESA Display Power Management Signaling standard
Industry leading DuoView Simultaneous display at Windows 98
-
Fully compliant ZV-port interface with device driver support for VPM
-
Motion compensation
-

PC CARD 95 (CARD BUS) interface controller - TI-1225

TI Card bus Interface Controller 1225 implements the PCMCIA 2.0/JEIDA 4.1 standard. It
contains the following functions:
Supports 2 PCMCIA 2.1& JEIDA 4.2 R2 cards or 2 CardBus cards
-
Yenta Registers-compatible
-
Supports Zoom Video Mode
-
PCMCIA dual-socket interface
-
One-Slot plus MPEG three Zoomed Video Ports support
-
8

Advertisement

Table of Contents
loading

Table of Contents