Card Format; Diagnostics; Version; Reader Test - ACT ACTPRO 4000 Operating And Installation Instructions

Access control system
Hide thumbs Also See for ACTPRO 4000:
Table of Contents

Advertisement

ACTpro 4000 Operating Instructions
__________________________________________________________________________
card number of cards bearing the secondary site code, to prevent conflicts. If the secondary
site code is not being used, it should be set to 00-0000-00.

Card Format

When "Active" is set to YES, the controller will recognize cards with a non-standard
(custom) format. The card information must be encoded using ISO/ABA Track 2 format
and may contain from 2 to 37 digits.
When "Check All" is set to YES, the controller will also allow cards encoded with one of
its standard built-in formats. This could be used (for example) in a transitional period
while older legacy cards are being phased out.
The Length field contains the total number of digits on the custom card. If this value is
non-zero, then any card with a different number of digits will be rejected.
The Site field allows the entry of the location of the starting digit of the site code field on
the card. The length specifies how many digits are in the site code (1-5).
The Card field allows the entry of the location of the starting digit of the card number field
on the card. The length specifies how many digits are in the card number (1-5).
The Issue field allows the entry of the location of the starting digit of the issue number
field on the card. The length specifies how many digits are in the issue number (1-3). If
issue numbering is not being used, then the start digit and length should be set to zero.
The Diagnostic menu provides some features that are of use when fault finding.

Version

The version of Firmware plus the date of firmware release running on the ACTpro 4000 is
displayed in this menu.

Reader Test

The Reader Test Menu allows a diagnostic of the card data to be displayed.
After entering this Menu a door must be selected where the test is performed and then the
"Swipe Card" is displayed on the second line. The card should then be presented to the
reader attached to the selected door.
__________________________________________________________________________________

Diagnostics

29
1.00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents