Reader Output Data Format; Wiring Information For "Clock & Data" Output - ACT PRO MIFARE CLASSIC READERS Operating And Installation Instructions

ACTpro MIFARE classic Operating and Installation Manual
Clock and Data
The default data output format from the ACTpro MIFARE classic readers is Clock and Data encoded as 10 BCD
digits (also known as Magnetic Stripe Track/2 or ABA).
Wiegand
The reader can be configured to output Wiegand formatted data rather that the default clock & data, by connecting
the Sense line to OV before powering on the reader, this will switch the unit to 37bit Wiegand output mode. The
reader can also be configured for 32 and 26bit Wiegand output using a programming card.
The standard Clock & Data wiring colours for ACTpro MIFARE Classic readers are shown below.
Reader PIN Description
Sense
Clock / D1
Data / D0
12-24 V DC
0 V
Red
Green
Wiring for Entry / Exit "Clock and Data" Readers

Reader Output Data Format

Wiring Information for "Clock & Data" Output
Recommended wiring colour
White
Green
Blue
Red
Black
Brown
Yellow
Description
Direction – connect for entry
Clock / D1
Data / D0
+ Voltage
- Voltage
Red LED
Green LED
Wiring for "Clock & Data" Entry Reader
Colour
White
Green
Blue
Red
Black
Brown
Yellow
Wiring for "Clock & Data" Exit Reader
Colour
White
Green
Blue
Red
Black
Brown
Yellow
3
Rev 1.0
Controller Pin
Sense
CLOCK / D1
DATA / D0
+12V
0V
RED
GREEN
Controller Pin
DO NOT CONNECT
CLOCK / D1
DATA / D0
+12V
0V
RED
GREEN