ACT ACTPRO 4000 Operating And Installation Instructions page 17

ACTpro 4000 Operating Instructions
__________________________________________________________________________
access. As an example: In a manufacturing environment, production workers are allowed
access Monday to Thursday from 8.30 to 17.00, and on Friday from 8.30 to 15.00 only. To
grant access to the workers at these times only, the times and days would be set up in a time
zone, and then group would be configured with this time zone using the Access Rights menu.
Users assigned to this group would only have access at the specified times and days.
Each time zone consists of up to eight periods of time and a corresponding combination of
assigned weekdays or holidays. The time zone is in force during the hours specified in any of
the eight time periods, but only on the days specified for that period.
The current time zone number will be displayed on the top line of the display. The desired
time zone may be selected using the 0 key or directly by entering the time zone number. The
lower line on the display will indicate if that time zone is active or inactive. Pressing the
allows the time zone to be edited. In edit mode, the top line of the display shows the available
periods in the form ABCDEFGH * -. The 0 key allows one of the eight periods to be selected
and pressing allows the period to be set.
Note: Time zones are also used by Timed Actions, which are part of Door Settings.
1) Select Time zone
2) Select period
3) Changing days/holidays
4) Changing time period
In addition, the time zone may be assigned a name or all time periods cleared quickly by
highlighting and selecting the * or – symbols respectively:
5) Assigning time zone name
__________________________________________________________________________________
Time zone 3
Not Programmed
A B C D E F G H + -
Week Days
08:30 -> 17:00
Wednesday
[TWTF—1—4]
Period
08:30 -> 17:00
A B C D E F G H * -
Assign Name ?
13
0 for next time zone
to edit time zone
0 for next period
to edit period
0 for next day/holiday
to select/deselect
when done
0-9 to set time
for next minute/hour
when done
to assign name
1.00
key