C7600_Ssc600-7; Camp Messages; Camp-3 - Cisco III - Supervisor Engine III Message Manual

Chapter 2 Messages and Recovery Procedures

C7600_SSC600-7

Error Message %C7600_SSC600-7-DP_DISABLE: [chars] FPGA is forced disabled.

CAMP Messages

This section contains Cooperative Asymmetric Multiprocessing (CAMP) messages.

CAMP-3

Error Message %CAMP-3-MP_INIT_FAILURE: Second CPU initialization failed
OL-11469-02
This FPGA has been disabled. Forced disabling is a debugging feature.
Explanation
No action is required.
Recommended Action
The module CPU unit has two CPU cores in it. The second CPU core did not initialize
Explanation
successfully, so the module is operating with only one CPU core.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
CAMP Messages
2-47