Mls_Acl_Common-4 - Cisco III - Supervisor Engine III Message Manual

Chapter 2 Messages and Recovery Procedures
MLS_ACL_COMMON-3
Error Message %MLS_ACL_COMMON-3-MLS_ACL_CONSIST_FIX: ACL TCAM inconsistency seen at
index [dec] and could not be fixed

MLS_ACL_COMMON-4

Error Message %MLS_ACL_COMMON-4-LOG_UPDATE_NO_RL: ACL TCAM update ([chars]
direction) occured on interface [chars]; [chars] action taken [chars] msec
Error Message %MLS_ACL_COMMON-4-LOG_UPDATE_RL: ACL TCAM update ([chars] direction)
occured on interface [chars]; [chars] action taken [chars] msec
OL-11469-02
The ACL TCAM inconsistency checker found an inconsistency between software and
Explanation
hardware TCAM entries and could not fix it . [dec] is the index where the inconsistency was found.
If this message recurs, copy the error message exactly as it appears on the
Recommended Action
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
An update of the ACL TCAM occurred on the specified interface. When the ACL
Explanation
TCAM is updated, the specified security action is taken for the specified time interval.
If this message recurs, copy the message exactly as it appears on the console
Recommended Action
or in the system log. Research and attempt to resolve the issue using the tools and utilities provided
at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
An update of the ACL TCAM occurred on the specified interface. When the ACL
Explanation
TCAM is updated, the specified security action is taken for the specified time interval.
Recommended Action If this message recurs, copy the message exactly as it appears on the console
or in the system log. Research and attempt to resolve the issue using the tools and utilities provided
at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
MLS_ACL_COMMON
2-169