Sibyte_Ion; Sibyte_Ion-3 - Cisco III - Supervisor Engine III Message Manual

Cisco ios system message guide
Table of Contents

Advertisement

Chapter 2
Messages and Recovery Procedures
Error Message %SFF8472-3-THRESHOLD_VIOLATION: [chars]: [chars]; Operating value:
[chars], Threshold value: [chars].
Error Message %SFF8472-3-UNEXPECTEDEVENT: Process received unknown event (maj [hex],
min [hex]).

SIBYTE_ION

This section contains Sibyte Ion messages.

SIBYTE_ION-3

Error Message %SIBYTE_ION-3-SB_THREAD_CTL_ERR: Call to ThreadCTL() failed: function
= [chars], line number = [dec], return_code = [dec], errno = [dec]
OL-11469-02
Explanation
There has been a threshold violation. The violation is specified in the message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
A process can register to be notified when various events occur. A process received an
Explanation
event that it did not know how to handle.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Explanation
A QNX call to ThreadCTL() failed. [chars] is the function, the first [dec] is the line
number, the second [dec] is the return code, and the third [dec] is the error number.
Copy the error message exactly as it appears on the console or in the system
Recommended Action
log. Research and attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
SIBYTE_ION
2-221

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the III - Supervisor Engine III and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents