Rpf Messages; Rpf-3 - Cisco III - Supervisor Engine III Message Manual

Chapter 2 Messages and Recovery Procedures
Error Message %RPC-2-FAILED_RETRY: Failed to send RPC request [chars] (will try
again)
Error Message %RPC-2-FAILED_USERHANDLE: Failed to send RPC request [chars]

RPF Messages

This section contains Reverse Path Forwarding (RPF) messages.

RPF-3

Error Message %RPF-3-RTAVLDELETE: Error deleting an rpf entry from the multicast rpf
tree
OL-11469-02
Explanation A communication error occurred during an RPC request. The system will attempt the
RPC request again.
If the attempt to send the RPC request fails again, copy the message exactly as
Recommended Action
it appears on the console or in the system log. Research and attempt to resolve the issue using the
tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and
utilities will supply clarifying information. Search for resolved software issues using the Bug
Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case
with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
A communication error occurred during an RPC request.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Explanation An internal software error occurred.
Copy the error message exactly as it appears on the console or in the system
Recommended Action
log. Research and attempt to resolve the error using the Output Interpreter at
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support
command to gather data that may help identify the nature of the error. Also perform a search of the
Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
RPF Messages
2-213