Table of Contents
Advertisement
C6K_WAN_C2W Messages
Error Message %C6K_PROCMIB-3-IPC_TRANSMIT_FAIL: Failed to send process statistics
update : error code = [chars]
Error Message %C6K_PROCMIB-3-MALLOC_FAILURE_IPC: Failed to allocate IPC message to
contact process
C6K_WAN_C2W Messages
This section contains Catalyst 6500 series switch and Cisco 7600 series router WAN C2Wire
(C6K_WAN_C2W) messages.
C6K_WAN_C2W-4
Error Message %C6K_WAN_C2W-4-READERROR: C2Wire read failed reg [hex] on device
[chars]
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-18
Explanation
An error occurred during an attempt to send an IPC message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
A memory allocation failure occurred during the processing of an IPC message.
Explanation
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Explanation
The SMbus driver failed to read from the specified C2W device.
No action is required if this warning message appears occasionally. If the
Recommended Action
message appears often in a short period of time, copy the message exactly as it appears on the
console or in the system log. Research and attempt to resolve the issue using the tools and utilities
provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply
clarifying information. Search for resolved software issues using the Bug Toolkit at
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
