Sip600_Qos Messages; Sip600_Qos-2 - Cisco III - Supervisor Engine III Message Manual

Chapter 2 Messages and Recovery Procedures

SIP600_QOS Messages

This section contains SPA Interface Processor 600 quality of service (SIP600_QOS) messages.

SIP600_QOS-2

Error Message %SIP600_QOS-2-INITFAIL: SIP-600 Initialization Failed [chars]: [chars]
[dec] [dec]
Error Message %SIP600_QOS-2-NOMEM: Memory Allocation Failure - [chars]: [chars]
[dec] [dec]
OL-11469-02
Explanation The SIP 600 could not initialize the memory that is needed for the QoS feature. A
hardware problem has occurred on the line card that prevents QoS from functioning.
If QoS is a desired feature, try to reload the line card. If the problem persists,
Recommended Action
copy the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some
messages, these tools and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require
assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
The SIP 600 could not allocate the memory that is required for the QoS feature. This
Explanation
condition might indicate that more memory must be installed on the affected line card or platform
to service all features and related entries that are enabled in the configuration.
Determine the available memory, and install more if necessary. If sufficient
Recommended Action
memory is available, reload the Cisco IOS image on the affected line card or platform. If the error
persists, copy the message exactly as it appears on the console or in the system log. Research and
attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With
some messages, these tools and utilities will supply clarifying information. Search for resolved
software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still
require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
SIP600_QOS Messages
2-233