Toothed Rod, Installing In The Housing - Volkswagen PASSAT Repair Manual

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Toothed rod, installing in the housing

- Grease teeth of toothed rod with AOF 063 000 04
grease
- Slide protective tube over toothed rod to stop
- Wipe away excess grease completely
No grease must get into the oil circulation system!
- Coat piston of toothed rod and protective tube with
hydraulic oil
- Install installation sleeve 3315/21 into the housing
- Slide toothed rod into the housing
When sliding, make sure that the sealing ring is
pressed into the groove of the piston without
jamming
- Slowly introduce the toothed rod into the housing
- Pull protective tube 3315/5 off the toothed rod
Page 73 of 99
48-73
12/7/2004