Volkswagen PASSAT Repair Manual page 316

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
- Coat piston of toothed rod and protective tube
with hydraulic oil
- Install installation sleeve 3315/22 into the housing
- Slide toothed rod into the housing
When sliding, make sure that the sealing ring is
pressed into the groove of the piston without
jamming
- Slowly introduce the toothed rod into the housing
- Pull protective tube 3315/13 off the toothed rod
Align teeth of toothed rod in such a way that they
point toward the teeth of the pinion
- Screw mounting sleeve 3315/18 on toothed rod
and coat with hydraulic oil
- Carefully slide toothed rod guide 1 over the
toothed rod into the housing to stop
- Slide toothed rod completely into the housing.
Page 46 of 99
48-46
12/7/2004