Rubber Mounting To Correct Camber/Toe - Volkswagen PASSAT Repair Manual

Rear axle, servicing (four wheel drive vehicles)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.3
Fig. 8

Rubber mounting to correct camber/toe

The rubber mounting -A- is equipped with an
eccentric bushing which can change the position of
the control arm.
This rubber mounting may only be installed in the
control arm inner mounting. The camber and/or toe
can be changed according to installation position.
Installation position
Eccentric upward
Eccentric downward
Eccentric forward
Eccentric rearward
Note:
With this mounting the camber or toe can be altered
up to 18'.
Page 9 of 13
Alteration
Camber alteration negative
Camber alteration pos.
Toe alteration positive
Toe alteration negative
42-41
12/7/2004