Inner Sealing Rod For Toothed Rod, Installing - Volkswagen PASSAT Repair Manual

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
Power steering gear, assembling
Note:
Lubricate the sealing rings with hydraulic oil
before installing
- Note correct installation position of the sealing ring
The sealing lip (arrow) of the sealing ring points
upward toward the teeth 1 on the valve body
For better viewing, the illustration shows the body
housing in cross section with installed valve body.
The valve body is shown slightly raised for better
viewing
- Place sealing ring for valve body on the tool and
drive in to stop. For installation position, see next
illustration
- Drive center roller bearing for valve body into stop

Inner sealing rod for toothed rod, installing

The sealing lip (arrow) of sealing ring -3- points
toward cylinder -4-.
1 - Valve body
2 - Support ring
3 - Sealing ring
4 - Cylinder
For better illustration, the drawing shows the housing
in cross section.
Page 71 of 99
48-71
12/7/2004