Airbag Unit, Removing And Installing - Volkswagen PASSAT Repair Manual

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Airbag unit, removing and installing

Removing
- Disconnect battery Ground strap.
- Center steering wheel (wheels straight-
ahead).
- Remove both socket head bolts from airbag unit.
- Remove airbag unit from steering wheel and
disconnect wiring connector from airbag unit.
Installing
Install in reverse order
Note:
Only use new hex socket head bolts for airbag unit.
Tightening torque: 6.5 Nm (57 in. Ib).
- After installing the airbag unit, switch on ignition
then connect battery Ground strap.
CAUTION!
Make sure that no one is in the vehicle when
connecting the battery Ground strap.
Page 7 of 99
48-7
12/7/2004