Suspension Strut, Removing And Installing; Bolting Mounting Bracket To Axle Beam - Volkswagen PASSAT Repair Manual

Rear Wheel Suspension, Shafts and Axle
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.1
Fig. 3 Suspension strut, removing and
installing
Suspension strut is attached to the body by 4
retaining lugs in addition to the bolts. To remove, turn
suspension strut until retaining lugs are positioned
above the cut-outs.
Fig. 4

Bolting mounting bracket to axle beam

Angle of inclination to axle beam 13 30'
Page 5 of 14
42-5
1 .
12/7/2004