Volkswagen PASSAT Repair Manual page 344

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
- Align teeth of toothed rod in such a way that they
point toward the teeth of the pinion
- Screw mounting sleeve 3315/16 on toothed rod
and coat with hydraulic oil
- Carefully slide toothed rod guide -1- over the
toothed rod into the housing to stop
- Slide toothed rod completely into housing if not
done yet
1 - toothed rod guide
- Install circlip in such a way that the opening of the
ring is opposite the groove in the housing
Valve body, installing
- Drive roller bearing in to stop with VW 421
Roller bearing must not be tipped when driving in
Page 74 of 99
48-74
12/7/2004