Adjusting Regulator - Volkswagen PASSAT Repair Manual

Brake pressure regulator, checking and adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.5

Adjusting regulator

Rear axle test pressure too high:
- Release tension on regulator spring.
Rear axle test pressures too low:
- Tension regulator spring.
Note:
Do not adjust with brake pedal depressed,
therefore observe the following sequence:
- Read off figures.
- Release pedal.
- Adjust spring.
- Depress pedal again.
- Read off figures and if necessary, readjust.
- Remove pressure gauges and bleed brake
system Page 47-27
Page 4 of 4
.
12/7/2004
47-26