Hub, Pressing In; Speed Sensor Rotor, Pressing In - Volkswagen PASSAT Repair Manual

Wheel bearings, servicing - disc brakes (four wheel drive vehicles)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.6
Fig. 5

Hub, pressing in

Note:
First install backing plate on control arm.
Tightening torque: 10 Nm (7 ft lb)
Fig. 6

Speed sensor rotor, pressing in

- Drive rotor off outer joint using a drift (rotor will be
destroyed).
- Drive new rotor carefully onto stop using a plastic
hammer.
Page 8 of 8
42-66
12/7/2004