Boot For Constant Velocity Joint, 90 Mm Dia; Drive Shaft, Left, With Inner Tripod Joint; Clamp; Always Replace - Volkswagen PASSAT Repair Manual

Front Wheel Suspension, Shafts and Axle
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1
Page 66 of 82

5 - Clamp

Always replace

Tightening, Fig. 2
and Fig. 3
6 - Boot for constant
velocity joint, 90 mm
dia.
Check for cracks and
abrasion
Before tightening the
small clamp, ventilate
boot briefly so
pressure is equalized,
Fig. 2
7 - Clamp
Always replace
Tightening, Fig. 2
and Fig. 4
8 - Drive shaft, left, with
inner tripod joint
Repair of inner joint
and replacement of
boot not possible at
this time
Replace if damaged
40-66
12/7/2004