Program M Ing Stitching Program M E Iii - DURKOPP ADLER DAC BASIC - V 12-2010 Manual

DAC basic/classic
5.3 Programming stitching programme II
Stitching programme II is a standard programmable programme for sewing on breast pockets for example.
Six partial runs with a maximum of 255 stitches can be programmed.
Programmable functionalities differ in two areas, global functions related to the sewing programme and local
functions related to the partial run.
Global functions:
• Interlocking (NA, NE)
• Thread clamp (FK)
• Thread cutter (FA)
• automatic elevation of sewing foot after thread cut
• Soft start
Local functions:
• Needle position when sewing stops
• automatic elevation of sewing foot when sewing stops
• Reduced speed
The functions can be activated directly using the buttons. When the machine is switched on they can also be
programmed in the individual seam runs S1 - S6.
The programmed seam run S1 is repeated at the end of the stitching programme.
You can browse forwards and backwards through the partial run parameters with the
button.
Programmed seam runs where the number of stitches = 0 will not be included when running the programme.
Changed parameters or functions are applied to the stitching programme immediately, i.e. the changes are
effective immediately.
Example:
Butto Position Setting
n
16 Programming
partial runs S1 - S4
Enter number of
stitches for partial
run S1
Select partial run
21 S2
Settings
18
Programming at user level
button and the
Display
© 2010 Dürkopp Adler AG