Thread Clamp And Sewing Foot Pressure Reduction - DURKOPP ADLER DAC BASIC - V 12-2010 Manual

12.9

Thread clamp and sewing foot pressure reduction

L C P Min
t 01 00 0
t 01 01 0
t 01 02 0
t 01 11 0
t 01 12 0
t 01 13 0,0
t 01 20 0
Thread clamp function ON: Press
The thread clamp mode can be selected with parameter t 01 00.
© 2010 Dürkopp Adler AG
Max Unit Description
4 - Thread clamp mode
0 = on switching angle FK = t0101,
FK = t0102,
Without FL;
1 = on switching angle FK = 108°,
Without FL;
2 = on switching angle FK = 49°,
Without FL;
3 = on switching angle FK = 49°,
Without FL;
4 = on switching angle FK = 108°,
5 = on switching angle FK = 108°,
6 = on switching angle FK = 30°,
7 = Without FK,
8 = on switching angle FK = t0101,
359 ° Thread clamp power on angle
359 ° Thread clamp power off angle
359 ° Sewing foot elevation power on angle
time lag ° Sewing foot elevation power off angle
10,0 %
Duty cycle of sewing foot lifting at mode 4-8
3 - Thread clamp options
0 = Thread clamp only at start of seam:
1 = Thread clamp at start of seam and at turn back position;
2 = FK at start of seam and with sewing foot elevation;
3 = FK at start of seam, return position and with sewing foot
button. LED on
out switching angle
out switching angle FK = 268°,
out switching angle FK = 110°,
out switching angle FK = 190°,
out switching angle FK 268°,
on switching angle FL = 108°,
out switching angle FL = 154°;
out switching angle FK = 268°,
on switching angle FL = 44°,
out switching angle FL = 154°;
out switching angle FK = 200°,
on switching angle FL = 50°,
out switching angle FL = 100°;
on switching angle FL = t0111,
out switching angle FL = t0112;
out switching angle FK = t0102,
on switching angle FL = t0111,
out switching angle FL = t0112
elevation;
53
Setting the basic functions