DAC basic/classic
3.2
Abbreviations used
Abbreviations used
VS
SP
SC
RB
P01
S01:001
S01:BT:1
S01S1000
NC
X1.1.....37
Syn?
Ref.Pos?
Pos. 1?
Pos. 2?
Load
<- Back up
<- Dongle
Store
-> Back up
-> Dongle
Err xxxx
Wrn xxxx
Inf xxxx
Meaning
view speed (current speed)
show position (current position in degrees)
stitch counter (bobbin thread reel counter)
reduced speed
first stitching programme
first seam section with a stitch
first sewing section with reverse sewing
first sewing section at a speed of 1000 rpm
Not count (not used)
machine connector ( 37 pin sub-D machine plug)
wait for index mark ->Move pedal forward
Set reference position
Move needle to position 1
Move needle to position 2
Load data from dongle or back up area into control
unit.
Save data on the dongle or in the back up area of the
control unit.
Error (look at chapter Error-, Warning- and
Information messages)
Warning (look at chapter Error-, Warning- and
Information messages)
Information (look at chapter Error-, Warning- and
Information messages)
10
OP1000 control unit
© 2010 Dürkopp Adler AG