Compaq ProLiant 800 User Manual page 95

Command Line Interface
Table 4-5: Enclosure Management Commands
Command
SHOW DATE
SHOW DISPLAY
EVENT
SHOW
ENCLOSURE FAN
[<fan number>
| ALL]
SHOW
ENCLOSURE
INFO
SHOW
ENCLOSURE
POWERSUPPLY
[<power
supply
number> |
ALL]
SHOW
ENCLOSURE
STATUS
4-18
Description
Displays the current date, time, and
time zone of the internal clock of the
enclosure.
Displays whether event notification is
on or off.
Displays the status, redundancy,
partner, speed, and part number for
the requested fan.
If ALL is entered, this information is
shown for all fans.
Displays the enclosure name, type,
part number, serial number, and asset
tag; the Integrated Administrator
software and hardware version;
Integrated Administrator MAC address;
and the interconnect tray type, part
number, and serial number.
Displays the power supply status, AC
input status, capacity, input voltage
range #1 (measured in Volts), input
voltage range #2 (if necessary,
measured in Volts), input frequency
range (measured in Hertz), part
number, serial number, and hardware
revision for the specified power supply
if one is specified or for all power
supplies if ALL is given.
Under an enclosure status heading,
this command displays the health,
Integrated Administrator health, and
unit identification LED of the enclosure.
Under a power status heading, this
command displays the power status
and capacity.
HP ProLiant BL e-Class Integrated Administrator User Guide
continued
Restrictions
None
None
None
None
None
None
continued