Compaq 219700-001 - ProLiant - 1500 Installation And User Manual
Compaq ide cd-rom drive for servers and workstations installation and user guide
Hide thumbs
Also See for 219700-001 - ProLiant - 1500:
- Reference manual (198 pages) ,
- User manual (89 pages) ,
- White paper (81 pages)
Related Manuals for Compaq 219700-001 - ProLiant - 1500
Summary of Contents for Compaq 219700-001 - ProLiant - 1500
- Page 1 IDE CD-ROM Drive for Servers and Workstations Installation and User Guide Second Edition ( November 1997) Part Number 242699-002 Compaq Computer Corporation...
- Page 2 MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST INFRINGEMENT. This publication contains information protected by copyright. No part of this publication may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. 1997 Compaq Computer Corporation.
-
Page 3: Table Of Contents
Product Safety Information....................viii Symbols on Equipment....................viii Laser Precautions ......................ix Rack Warnings and Precautions .....................x Interlock Switches.........................xi Getting Help..........................xi Compaq Web Site......................xi Telephone Numbers...................... xii Chapter 1 Introduction Features ..........................1-2 Compatibility ........................1-2 Front Panel Controls ......................1-3 Rear Panel Components ..................... - Page 4 Chapter 3 Operating the Drive Front Panel Controls ......................3-1 Loading a Disc ........................3-2 Precautions......................... 3-3 For the Drive ....................... 3-3 For the Disc......................... 3-4 Appendix A Regulatory Compliance Notices Federal Communications Commission Notice ..............A-1 Class A Equipment......................A-1 Class B Equipment......................A-2 Declaration of Conformity for Products Marked with FCC Logo, United States Only...A-3 Modifications ......................A-3 Cables .........................A-3...
- Page 5 Appendix B Electrostatic Discharge Grounding Methods ......................B-1 Appendix C Specifications Compact Disc........................C-1 IDE CD-ROM Drive ......................C-2 Appendix D Getting Help Self-Help Tools ........................D-1 Telephone Support ......................D-2 Index IDE CD-ROM Drive for Servers and Workstations Installation and User Guide...
-
Page 6: About This Guide
vii About This Guide About This Guide This User Guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and future upgrades. Text Conventions This document uses the following conventions to distinguish elements of text: Keys Keys appear in boldface. -
Page 7: Symbols In Text
viii About This Guide Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. WARNING: Indicates that failure to follow directions in the warning could result in bodily harm or loss of life. CAUTION: Indicates that failure to follow directions could result in damage to equipment or loss of information. -
Page 8: Laser Precautions
Laser Precautions WARNING: To reduce the risk of injury from laser radiation or damage to the equipment, observe the following precautions: Allow only Compaq Authorized Service Technicians to repair the equipment. Do not open any panels, operate controls, make adjustments, or perform procedures to a laser device other than those specified herein. -
Page 9: Rack Warnings And Precautions
x About This Guide Rack Warnings and Precautions Before beginning these procedures, make sure you understand the following warnings and caution: WARNING: To reduce the risk of personal injury, always ensure that the rack is adequately stabilized before extending a component outside the rack. -
Page 10: Interlock Switches
Compaq Web Site The Compaq Web Site has information on this product as well as the latest drivers and Flash ROM images. You can access the Compaq Web Site by logging on to the Internet at http://www.compaq.com. -
Page 11: Telephone Numbers
About This Guide Telephone Numbers For the name of your nearest Compaq Authorized Reseller: In the United States, call 1-800-345-1518 In Canada, call 1-800-263-5868 For Compaq technical support: In the United States and Canada, call 1-800-386-2172 Elsewhere, call one of the numbers listed in the following table. - Page 12 About This Guide Compaq Worldwide Technical Support Telephone Numbers continued Location Voice Europe/Middle East/Africa (49) 089-9933-2891 Finland 9800-206-720 90-6155-9899 (+358-800-1-206720) (+358-0-61559899) France (33 1) 41-33-4455 (33 1) 41-33-4263 Germany 0180-5-212111 089-9933-3399 Hong Kong 852-90116633 852-28671734 Hungary 36-1-201-8776 36-1-201-9696 India...
- Page 13 xiv About This Guide IDE CD-ROM Drive for Servers and Workstations Installation and User Guide...
-
Page 14: Introduction
Introduction Chapter 1 Introduction The Compaq IDE CD-ROM Drive is a 5.25-inch, half-height, compact disc read-only memory (CD-ROM) drive with an integrated drive electronics (IDE) interface. The drive is a random access, read-only storage device capable of retrieving data from removable compact disc media. The compact discs designed for this drive can store as much as 650 megabytes of digital information. -
Page 15: Features
(manual) MPC 2 (Multimedia Personal Computers) compatibility Compatibility The Compaq IDE CD-ROM Drive operates under most industry-standard system software, including products from Novell, Microsoft, SCO, and IBM. The drive is compatible with industry-standard ISO 9660, MPC (Multimedia Personal Computers) 2, and High Sierra logical formats. It can read:... -
Page 16: Front Panel Controls
Introduction Front Panel Controls The front panel controls for an optional Compaq IDE CD-ROM Drive are indicated as follows: COMPACT Figure 1-2. Front Panel Controls on a Compaq IDE CD-ROM Drive Table 1-1 Front Panel Controls for a Compaq IDE CD-ROM Drive... -
Page 17: Rear Panel Components
While the front panel controls are identical on all drives, some features on the rear panels may vary. The following illustrates the general arrangement of rear panel components for an optional Compaq IDE CD-ROM drive. The drive you receive may differ slightly. Figure 1-3. -
Page 18: Installing An Optional Cd-Rom Drive
Installing an Optional CD-ROM Drive This chapter outlines general instructions for installing an optional Compaq IDE CD-ROM Drive in a generic Compaq system. For more information on installation in your particular system, see the documentation that was shipped with your unit. -
Page 19: Components Included In The Option Kit
Option Kit In addition to this guide, the following hardware components are included in the option kit. If any of these items are missing, contact an authorized Compaq dealer, reseller, or service provider. In addition to the listed components, your kit may also contain some product- specific components. -
Page 20: Recommended Configurations
IDE controller for this option. Recommended configurations are shown in the following table. See Appendix D, “Getting Help,” for information on how to contact Compaq or an authorized representative to order a second controller, if necessary. - Page 21 Installing an Optional CD-ROM Drive Table 2-2 Recommended IDE Controller Configurations Devices Installed Controller Connector One hard drive Primary Device 0 Hard drive One CD-ROM drive Device 1 CD-ROM Drive * Secondary Not installed One hard drive Primary Device 0 Hard drive One CD-ROM drive Device 1...
-
Page 22: Installation Summary
Installing an Optional CD-ROM Drive Installation Summary Prepare the system by: Performing a normal system shutdown. Turning OFF the system and then all peripheral devices. Disconnecting the power cord from the outlet, then from the system and all peripheral devices. Preparing your system so that you have access to the removable media drive bays. -
Page 23: Installation Sequence
Make sure that the jumpers on the rear of the drive match the settings indicated in Table 2-3. 1 2 3 Figure 2-1. Default Jumper Setting on a Compaq IDE CD-ROM Drive IDE CD-ROM Drive for Servers and Workstations Installation and User Guide... - Page 24 Disabled, not installed (Primary device) Although the Compaq IDE CD-ROM drive is set for cable select, the IDE Interface Cables included in this option kit do not support cable select. If you must use one of these cables, use the table above to set the jumpers on the drive to Device 1 (secondary/slave) or Device 0 (primary), as appropriate for your system.
-
Page 25: Step 2 - Installing The Drive Rails
If your system requires drive rails, attach the two rails in this kit with the four screws provided (two screws for each side). AC T CO MP Figure 2-2. Attaching Drive Rails to a Compaq IDE CD-ROM Drive IDE CD-ROM Drive for Servers and Workstations Installation and User Guide... -
Page 26: Step 3 - Inserting The Drive
Installing an Optional CD-ROM Drive Step 3 - Inserting the Drive Horizontal Orientation Position the drive on the drive guides, then slide it into the drive bay, as indicated. COM PAC Figure 2-3. Inserting the CD-ROM Drive into a Horizontal Drive Bay IDE CD-ROM Drive for Servers and Workstations Installation and User Guide... -
Page 27: Step 4 - Connecting The Cables
2-10 Installing an Optional CD-ROM Drive Vertical Orientation Position the drive on the drive guides, then slide it into the drive bay, as indicated. Figure 2-4. Inserting the CD-ROM Drive into a Vertical Drive Bay Securing the Drive Secure the drive to the computer with the 2 retaining screws provided in this kit, or with the retaining screws from the front bezel. - Page 28 2-11 Installing an Optional CD-ROM Drive Figure 2-5. IDE Interface Cable Connectors Table 2-4 IDE Interface Cable Connectors Reference Connector System board connector Secondary drive connector (Device 1) Primary drive connector (Device 0) Connector is for the secondary drive (device 1); connector is for the primary drive (device 0).
- Page 29 2-12 Installing an Optional CD-ROM Drive Figure 2-6. Connecting the Drive Cables Table 2-5 Drive Cable Connections Reference Connector Audio connector IDE connector Power connector If you are installing this IDE drive as the primary drive and your system has audio capabilities, attach the audio cable supplied with your system to the audio connector on the CD-ROM drive.
-
Page 30: Completing The Installation
If this IDE CD-ROM drive is of a different type than the one installed, or if it is a new IDE device, see Appendix D, “Getting Help,” for information on how to contact Compaq or an authorized representative to determine if you need an additional driver for your system configuration. -
Page 31: Operating The Drive
Operating the Drive Chapter 3 Operating the Drive This chapter outlines the basic functions of your new Compaq IDE CD-ROM Drive. Front Panel Controls The following controls are located on the front panel. AC T CO MP Figure 3-1. Front Panel Controls on a Compaq IDE CD-ROM Drive... -
Page 32: Loading A Disc
Operating the Drive Loading a Disc Use the following steps to load a compact disc in the drive: 1. Turn on the computer. The busy indicator on the CD-ROM drive illuminates. 2. Holding the disc by the edges, not by the flat surfaces of the disc, slide it label side up into the drive. -
Page 33: Precautions
Operating the Drive Vertical Orientation of the CD-ROM Drive Figure 3-3. Loading a Compact Disc into a Vertical CD-ROM Drive Precautions Follow these precautions for the best care of your CD-ROM drive and discs. Drive Precautions Keep the original packing materials for future transportation of the drive. - Page 34 Any type of solvent, such as alcohol or benzene, may damage the finish. If any object or liquid falls into the cabinet, immediately unplug the computer and have it checked by a Compaq authorized service provider. Disc Precautions Remove the disc from the drive before moving the unit.
-
Page 35: Regulatory Compliance Notices
A-1 Regulatory Compliance Notices Appendix A Regulatory Compliance Notices Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules. -
Page 36: Class B Equipment
A-2 Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 37: Declaration Of Conformity For Products Marked With Fcc Logo, United States Only
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment. IDE CD-ROM Drive for Servers and Workstations Installation and User Guide... -
Page 38: Canadian Notice (Avis Canadien
A-4 Regulatory Compliance Notices Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B Equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. -
Page 39: Japanese Notice
A-5 Regulatory Compliance Notices Japanese Notice Australian Notice This customer equipment is to be installed and maintained by service personnel as defined by AS/NZS 3260 Clause 1.2.14.3. Service Personnel. Incorrect connection of connected equipment to the General Purpose Outlet could result in a hazardous situation. Safety requirements are not fulfilled unless the equipment is connected to a wall socket outlet with protective earth contact. -
Page 40: Laser Devices
A-6 Regulatory Compliance Notices Laser Devices The CD-ROM drive contains a laser device. All Compaq systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies as a Class 1 laser product. -
Page 41: Laser Product Label
A-7 Regulatory Compliance Notices Laser Product Label The following label or equivalent is located on the surface of your CD-ROM drive. This label indicates that the product is classified as a CLASS 1 LASER PRODUCT. This label appears on a laser device installed in your product. - Page 42 A-8 Regulatory Compliance Notices IDE CD-ROM Drive for Servers and Workstations Installation and User Guide...
-
Page 43: Electrostatic Discharge
B-1 Electrostatic Discharge Appendix B Electrostatic Discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. - Page 44 B-2 Electrostatic Discharge If you do not have any of the suggested equipment for proper grounding, have an Authorized Compaq Reseller install the part. NOTE: For more information on static electricity, or assistance with product installation, contact your Authorized Compaq Reseller.
-
Page 45: Specifications
C-1 Specifications Appendix C Specifications Specific dimensions and features for some of the components mentioned in this guide are listed here. Compact Disc Table C-1 Compact Disc Feature Details Applicable Disc CD-ROM Mode 1 and Mode 2, mixed mode (audio and data combined) CD-DA Ready... -
Page 46: Physical Characteristics
C-2 Specifications IDE CD-ROM Drive Physical Characteristics Table C-2 CD-ROM Drive Physical Characteristics Feature U.S. Metric Dimensions Width 5.91 in 150.1 mm Height 1.69 in 42.9 mm Depth 8.19 in 208.0 mm Weight 2.65 lb 1200 g Power Requirements Table C-3 CD-ROM Drive Power Requirements Power Requirement Details... - Page 47 C-3 Specifications Performance Table C-4 CD-ROM Drive Performance Feature Details Audio Output Level Line out 0.7 V rms Cache/Buffer Minimum 128 Kbytes Error Rates Soft error 10 - Hard error 10 - Seek error 10 - Interface Cable Length Maximum 18 in (45.7 cm) 26 in (65.0 cm) Start-up Time...
- Page 48 Compaq support programs. Online Support Compaq technical support areas are accessible on the Internet and the three leading commercial online networks. These electronic communities allow you direct access to Compaq technical information on products and services, 7 days a week 24 hours a day.
-
Page 49: Telephone Support
Compaq via modem. To expedite the download of a file, you should already know the name of the file you need (from a Compaq Technical Support Engineer, another Compaq user, or a Service Advisory). -
Page 50: Technical Support
D-3 Getting Help Technical Support For expert technical diagnosis and troubleshooting: In the United States and Canada, call 1-800-386-2172 Elsewhere, call one of the following numbers: Compaq Worldwide Technical Support Telephone Numbers Location Voice 65-7503030 65-7504909 Argentina 54-1 313 3100... - Page 51 D-4 Getting Help Compaq Worldwide Technical Support Telephone Numbers Continued India (91-80) 559-6023 Italy 392-57-90300 392-575-00686 Japan 0120-101589 +81 3-5402-5959 Korea 82-2-523-3575 82-2-3471-0321 Malaysia (603) 718-1636 Mexico (525) 229-7910 (525) 229-7988 Netherlands 06-91681616 06-8991116 New Zealand 649-307-3969 Norway 22-072-020 22-072-021...
- Page 52 About This Guide v drive rails 2-8 inserting the drive 2-9 summary 2-5 tools 2-1 Cables, connecting 2-11 Interlock switch features ix Compaq Web Site ix Compatible drive formats 1-2 Components option kit 2-2 Kit components 2-2 rear panel 1-4 Configurations, recommended 2-3...
- Page 53 Index -2 Telephone Numbers x Text Conventions v Tools needed 2-1 Error! Cannot open file referenced on page 11 IDE CD-ROM Drive for Servers and Workstations Installation and User Guide...