Compaq ProLiant 800 User Manual page 119

Setting Up the System
Figure 5-1: Setting the enclosure name and rack name
7. Click Apply.
To modify the enclosure name or rack name using the CLI, enter the following
commands sequentially:
SET ENCLOSURE NAME <enclosure name>
IMPORTANT: The <enclosure name> must be 1-32 characters long and includes all
alphanumeric, the dash, and the underscore characters.
The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with
the actual MAC address.
SET RACK NAME <rack name>
IMPORTANT: The <rack name> must be a maximum of 32 characters long and includes all
alphanumeric, dash, and underscore characters. The default rack name is "UnnamedRack."
5-6 HP ProLiant BL e-Class Integrated Administrator User Guide