Powering Off The Enclosure - Compaq ProLiant 800 User Manual

Performing Advanced Functions
The
POWERON BAY
argument which sets server blade boot order for that boot only. These settings are the
same as the
To determine if any boot order changes are pending for a specific blade, use the
command. The "Pending Boot Order:" status line will show any pending
BAY INFO
changes to the boot order, either one-time or permanent.

Powering Off the Enclosure

CAUTION: Powering off the enclosure removes all power from the server blades
and ends all open sessions. After powering off the enclosure, you can only power on
the enclosure if you have physical access to the enclosure.
To power off the enclosure using the Web-based user interface:
1. Click the Enclosure tab.
2. Click Virtual Buttons in the left panel.
Figure 7-1: Accessing Virtual Buttons
7-8
and
REBOOT BAY
SET BAY BOOT ONCE
HP ProLiant BL e-Class Integrated Administrator User Guide
commands have been extended to allow an
command.
SHOW