Compaq ProLiant 800 User Manual page 82

Table 4-2: General Management Commands
Command
GENERATE
CERTIFICATE
REQUEST
GENERATE
CERTIFICATE
SELFSIGNED
PING
{<number>}
[<IP address>
| <server
name>]
SET DISPLAY
EVENTS [ON |
OFF]
SET EXPERT
{MODE} [ON |
OFF]
SET FACTORY
SET SCRIPT
MODE [ON |
OFF]
HP ProLiant BL e-Class Integrated Administrator User Guide
Description
Generates a PKCS#10 certificate request.
Generates a self-signed certificate.
Sends ICMP echo messages to a remote IP
device.
If <number> is omitted, only 5 packets are sent.
Packets are sent out at 1-second intervals.
Turns event notification on or off
The Integrated Administrator preserves this
setting across all logins.
Turns EXPERT MODE on or off. When EXPERT
MODE is turned on, the system will not prompt
the user to confirm actions. Users should
exercise caution when working in EXPERT
MODE as many actions are not reversible.
Sets the Integrated Administrator back to its
factory defaults.
The "Administrator" account password does not
change. The Integrated Administrator is
restarted after all the changes are made.
Note: This command removes all groups, users,
and other customization from the memory of the
enclosure, and the information is unrecoverable.
When SCRIPT MODE is on, all prompting and
verifications of entries ceases.
If SCRIPT MODE is on, the following commands
require a password argument: ADD USER, SET
USER PASSWORD, or SET PASSWORD.
Default values are used for any parameters that
would normally require user interaction.
continued
Command Line Interface
Restrictions
Only enclosure
administrators may
execute this command.
Only enclosure
administrators may
execute this command.
The <IP address> must
be in the form
###.###.###.### where
### ranges from
0 to 255.
None
None
Only the "Administrator"
account may execute
this account.
None
continued
4-5