Compaq ProLiant 800 User Manual page 109

Command Line Interface
Table 4-8: Functionality Exclusive to the Command Line Interface
Function
Enclosure Management Commands, continued
SHOW ENCLOSURE
POWERSUPPLY
[<power supply
number> | ALL]
SHOW ENCLOSURE
STATUS
UPDATE IMAGE
<URL>
UPLOAD CONFIG
<url>
CLEAR SESSION
BAY <bay
number>
4-32
Description
Displays the status of the power
supply, AC input status, capacity,
input voltage range #1 (measured in
Volts), input voltage range #2
(measured in Volts), input frequency
range (measured in Hertz), part
number, serial number, and
hardware revision for the specified
power supply if one is specified or
for all power supplies if ALL is given.
Under an enclosure status heading,
this command displays the health of
the enclosure, Integrated
Administrator health, and unit
identification LED.
Under a power status heading, this
command displays the power status
and capacity.
Downloads a new image from a
server over the network and uses
the image to upgrade the firmware of
the enclosure.
Uploads the current runtime
configuration to the specified FTP or
TFTP server.
Terminates a Terminal session from
the enclosure.
This is not a graceful termination.
The connected user loses any
unsaved work.
HP ProLiant BL e-Class Integrated Administrator User Guide
continued
Capability Exclusive to the
Command Line Interface
The command line adds the input
voltage ranges, input frequency
range, serial number, and
hardware revision.
The command line adds the
Integrated Administrator health
All
All
All
continued