Compaq ProLiant 800 User Manual page 90

Table 4-4: Enclosure Network Configuration Commands
Command
DOWNLOAD
CONFIG
<url>
ENABLE
SECURESH
ENABLE SNMP
ENABLE
TELNET
ENABLE WEB
REMOVE SNMP
TRAPRECEIVE
R <IP
address>
SET DNS
<primary
address>
{<secondary
address>}
HP ProLiant BL e-Class Integrated Administrator User Guide
Description
Downloads a previously saved
configuration file from a specific IP host
The files are auto-executed in script
mode. The file is not allowed to change
the password of the "Administrator"
account. Supported protocols are http,
ftp, and tftp. The URL should be
formatted as protocol://host/path/file. If
your ftp server does not support
anonymous connections, you can
specify a username and password by
replacing the host part in the previous
format with username:password@host.
Enables Secure Shell support for the
Integrated Administrator
Enables SNMP support for the
Integrated Administrator
Enables Telnet access to the
Integrated Administrator
Enables HTTP and HTTPS access to
the Integrated Administrator
Removes an IP address from the list of
systems to receive SNMP traps
Sets the primary and secondary DNS
server addresses
These servers are only used if the
system is currently configured to use a
static IP address.
Command Line Interface
continued
Restrictions
Only enclosure administrators may
execute this command.
The IP address must be in the form
###.###.###.### where ### ranges
from 0 to 255.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
The IP address must be in the form
###.###.###.### where ### ranges
from 0 to 255.
Only enclosure administrators may
execute this command.
The <primary address> and
<secondary address> must be in
the form ###.###.###.### where
### ranges from 0 to 255.
continued
4-13