Compaq ProLiant 800 User Manual page 94

Table 4-5: Enclosure Management Commands
Command
SET ENCLOSURE
ASSET {TAG}
<asset tag>
SET ENCLOSURE
NAME
<enclosure
name>
SET ENCLOSURE
UID [ON |
OFF]
SET RACK NAME
<rack name>
SHOW CONFIG
HP ProLiant BL e-Class Integrated Administrator User Guide
Description
Changes the enclosure asset tag
Changes the enclosure name
Turns the enclosure Unit Identification
LED on or off
Sets the name for the rack where the
enclosure resides
Displays the script required to recreate
the settings of the enclosure
Passwords are not included for any
user.
continued
Restrictions
Only enclosure administrators
may execute this command.
The <asset tag> must be 1-31
characters long and includes
alphanumeric, dash, and
underscore characters.
The default enclosure asset tag
is blank. To set a blank asset tag,
specify the blank value using
quotes.
Only enclosure administrators
may execute this command.
The <enclosure name> must be
1-32 characters long and
includes all alphanumeric, the
dash, and the underscore
characters.
The default enclosure name is
IA-MAC where MAC is replaced
with the actual MAC address.
Only enclosure administrators
may execute this command.
Only enclosure administrators
may execute this command.
The <rack name> must be 1-32
characters long and includes all
alphanumeric, dash, and
underscore characters.
The default rack name is
"UnnamedRack."
Only enclosure administrators
may execute this command.
Command Line Interface
continued
4-17