Accessing The Command Line Interface; Accessing Remotely Through The Management Connector; Accessing Locally Through The Console Connector - Compaq ProLiant 800 User Manual

Command Line Interface

Accessing the Command Line Interface

You can access the CLI remotely through the management (10/100 Ethernet)
connector or locally through the console (serial) connector on the rear panel of the
enclosure.

Accessing Remotely through the Management Connector

To access the Integrated Administrator command line interface remotely through the
management (10/100 Ethernet) connector:
1. Get the default host name from the settings tag attached to the interconnect tray.
2. Open a Telnet or Secure Shell application and enter the IP address or DNS name
for the enclosure you wish to access.
3. Enter the user name and password into the Login prompt.

Accessing Locally through the Console Connector

To access the Integrated Administrator locally through the serial connector:
1. Connect a local client device, such as a laptop computer, to the serial connector
using the null-modem cable that ships with the enclosure.
IMPORTANT: Client devices must satisfy the requirements provided in the "Requirements
for Local Client Devices" section in this chapter.
2. Open the terminal emulator and press the Enter key to get the login prompt.
3. Enter the user name and password.
4-2
CAUTION: Using Telnet instead of Secure Shell means your remote session,
including password, appears in clear text on that network.
HP ProLiant BL e-Class Integrated Administrator User Guide