General Management Commands - Compaq ProLiant 800 User Manual

Command Line Interface

General Management Commands

Table 4-2: General Management Commands
Command
CLEAR SESSION
SWITCH [A |
B]
CLEAR SSHKEY
CONNECT
SWITCH [A |
B]
DOWNLOAD
CERTIFICATE
<url>
DOWNLOAD
SSHKEY
4-4
Description
Terminates a Terminal session from the
enclosure.
This is not a graceful termination. The
connected user loses any unsaved work.
Removes the contents of the Secure Shell
authorized keys file. After performing this
command, you will not be able to login using
public key-based authentication.
Opens a remote console connection to switch A
or B.
A single switch cannot support multiple
simultaneous remote console sessions.
Downloads a CA supplied PKCS#7 file to
replace the current security certificate on the
system.
Supported protocols are http, ftp, and tftp. The
URL should be formatted as follows:
protocol://host/path/file
If your ftp server does not support anonymous
connections, you can specify a username and
password by augmenting the host part in the
above format with username:password@host.
Downloands an authorized key file to use with
Secure Shell v2 which can contain the public
keys for any enclosure administrator. Supported
protocols are http, ftp, and tftp. The url should
be formatted as protocol://host/path/file. If your
ftp server does not support anonymous
connections, you can specify a username and
password by replacing the host part in the
previous format with username:password@host.
HP ProLiant BL e-Class Integrated Administrator User Guide
Restrictions
Group administrators
may only execute this
command for server
blade bays to which
they have access.
Only enclosure
administrators may
execute this command.
Only enclosure
administrators may
execute this command.
Only enclosure
administrators may
execute this command.
Only enclosure
administrators may
execute this command.
continued