Compaq ProLiant 800 User Manual page 85

Command Line Interface
Table 4-3: User Account Commands
Command
ASSIGN
ADMINISTRATO
R {RIGHTS}
<user name>
ASSIGN BAY
[ALL | <bay
number> {[ ,
| -] <bay
number>}]
<group name>
ASSIGN USER
<user name>
<group name>
{[VIEW |
MODIFY]}
DISABLE USER
<user name>
ENABLE USER
<user name>
REMOVE GROUP
[ALL |
<group
name>]
4-8
continued
Description
Promotes a user to have
enclosure administrator
permissions
Group membership is not
deleted in case enclosure
administrator rights are
removed at a later time.
Assigns one or more bays to
a group
If a bay is already assigned to
a group, it must first be
unassigned before executing
this command.
Assigns a user to a group with
View rights (for group
members) or View/Modify
rights (for group
administrators)
If View or View/Modify is not
specified, View is chosen by
default.
Disables a user account
The user is immediately
logged out of the system and
prevented from log in until the
account is enabled.
Enables a user account that
was previously disabled by
the DISABLE USER
command
Removes a group and
automatically unassigns all
bays within the group
HP ProLiant BL e-Class Integrated Administrator User Guide
Restrictions
Only enclosure administrators may execute
this command.
The <user name> is case-sensitive.
Only enclosure administrators may execute
this command.
The <group name> is case-sensitive.
Only enclosure administrators may execute
this command.
The <user name> and <group name> are
case-sensitive. The "Administrator" account
cannot be added to a group.
Only enclosure administrators may execute
this command.
The <user name> is case-sensitive. The
"Administrator" account cannot be disabled.
Only enclosure administrators may execute
this command.
The <user name> is case-sensitive.
Only enclosure administrators may execute
this command.
The <group name> is case-sensitive.
continued