Setting Up Automatic Time Configuration (Ntp) - Compaq ProLiant 800 User Manual

Table 5-4: IP Security Commands
Function
Add an IP address
Remove an IP address
Enable IP Security
Disable IP Security

Setting Up Automatic Time Configuration (NTP)

Automatic time configuration allows the Integrated Administrator to synchronize its
date and time with a server supporting the Network Time Protocol (NTP).
Table 5-5: Automatic Time Configuration Commands
Set the NTP poll interval*
Set the primary NTP server
Set the secondary NTP server
Disable the secondary NTP server
Enable NTP
Disable NTP
* If an NTP poll interval is not set, it will default to 720 seconds. The
minimum time interval is 60 seconds and the maximum is 9999 seconds.
HP ProLiant BL e-Class Integrated Administrator User Guide
Command
ADD IPMANAGER <ip address>
REMOVE IPMANAGER <ip
address>
ENABLE IPSECURITY
DISABLE IPSECURITY
SET NTP POLL <seconds>
SET NTP PRIMARY <ip address>
SET NTP SECONDARY
<ip address>
SET NTP SECONDARY NONE
ENABLE NTP
DISABLE NTP
Setting Up the System
5-25