Compaq ProLiant 800 User Manual page 86

Table 4-3: User Account Commands
Command
REMOVE USER
[ALL | <user
name>]
SET GROUP
{DESCRIPTION
} <group
name>
<description
>
SET PASSWORD
{<password>}
HP ProLiant BL e-Class Integrated Administrator User Guide
continued
Description
Removes a user from the
system
If ALL is specified, the
command is run for all users
except the default system
accounts.
Sets a group's description.
Sets the password of the user
currently logged into the
Integrated Administrator.
If a password is not given on
the command line, the user is
prompted for one.
Note: This command is not
valid in SCRIPT MODE if
password is not specified.
Command Line Interface
Restrictions
Only enclosure administrators may execute
this command.
The <user name> is case-sensitive. The
"Administrator," "switcha," and "switchb"
accounts cannot be removed.
Only enclosure administrators may execute
this command.
The <group name> is case-sensitive. The
<description> must be 0-20 characters long
and can include all alphanumeric
characters, the dash, the underscore, and
spaces.
The default group description is blank.
If spaces are part of the contact
information, enclose the information in
quotes.
The <password> must be 3-8 characters
long and can include all printable
characters.
continued
4-9