Compaq ProLiant 800 User Manual page 100

Table 4-6: Server Bay Management Commands
Command
SET BAY UID <bay
number> {[ , | - ]
<bay number>} [ON |
OFF]
SHOW BAY INFO [ALL |
<bay number> {[ , |
- ] <bay number>}]
SHOW BAY LIST [ALL |
<group name>]
SHOW BAY STATUS [ALL
| <bay number> {[ ,
| - ] <bay number>}]
HP ProLiant BL e-Class Integrated Administrator User Guide
continued
Description
Turns a Unit Identification LED
on the server blade on or off.
Displays the following fields:
Assigned to group, type, name,
installed operating system, part
number, serial number, asset
tag, BIOS version, all CPU
types and associated
maximum speeds, memory,
NIC #1 MAC, and NIC #2
MAC.
If no server is in the bay, the
user is shown the assigned to
group and the server blade
type.
Displays the assigned to
group, remote console user,
and server blade name for
each bay in a particular group
if a group name is specified or
all bays if ALL is specified
Displays the power (On or Off),
assigned to group, remote
console user, health (OK, CPU
failure, or power module
failure), thermal (OK, warm,
degraded, or failed), and Unit
Identification LED (On or Off)
for the server blade.
Command Line Interface
Restrictions
Only enclosure and group
administrators may execute
this command.
Group members and group
administrators only see
information for the bays in their
groups.
Group members and group
administrators only see
information for the bays in their
groups.
Group members and group
administrators only see
information for the bays in their
groups.
continued
4-23