Command Line Event Messages - Compaq ProLiant 800 User Manual

Command Line Event Messages

Table 4-7: Command Line Event Messages
Message
User Event Messages
User Permission Change
Enclosure Event Messages
Enclosure Shutdown
Enclosure Status Change
Fan Inserted
Fan Removed
Fan Status Change
Power Supply Inserted
Power Supply Overload
Power Supply Redundancy
Change
Power Supply Removed
Power Supply Status
Change
Restart Event
Thermal Status Change
HP ProLiant BL e-Class Integrated Administrator User Guide
Possible Cause
One of the following has occurred:
•
A user has been added, removed, or modified.
•
A user's group membership has been modified.
The server blade bay membership has been changed for a group
with at least one user.
The enclosure is being shutdown.
The Integrated Administrator detected a change in status due to a
change in the state of one or more hardware components or server
blade readings.
A fan has been inserted.
A fan has been removed.
The status of a fan has changed.
A power supply has been inserted.
The power subsystem is overloaded. Check each power supply
status to determine cause.
The power supplies are now either redundant or no longer
redundant.
A power supply has been removed.
The status of a power supply has changed.
The Integrated Administrator is about to restart.
The state of a thermal sensor has changed.
Command Line Interface
continued
4-25